F4 ACCESSORIES
|
F4 ACCESSORIES |
|
|
DA-20 Action Finder |
Center-Weighted and Spot metering only. Good for situations where normal viewing is difficult or impossible, such as when wearing a helmet or goggles, or with the camera encased in an underwater housing. |
|
DW-20 Waist-Level Finder |
Spot metering only. Has a 5X magnification on the center of the image for accurate focusing. |
|
DW-21 High-Magnification Finder |
Spot metering only. For critical high magnification close-up work. |
|
Type B Focusing Screen |
Matte/Fresnel field with 5mm diameter and 12mm diameter reference circles and focus brackets. For general phootgraphy. |
|
Type U Focusing Screen |
Matte/Fresnel field with 5mm and 12mm diameter reference circles and focus brackets. Recommended for telephoto lenses longer than 200mm. |
|
Type F Focusing Screen |
Matte/Fresnel field with 5mm and 12mm diameter reference circles and focus brackets. Suitable with reflex (mirror) lenses. |
|
Type C Focusing Screen |
Fine-ground matte field with 5mm diameter clear spot and cross hair. |
|
Type M Focusing Screen |
Fine-ground Fresnel field with 5mm diameter clear spot and cross hair for use in parallax focusing on aerial images, plus millimeter scales for calculation on individual magnification of objects or for measuring objects. |
|
Type E Focusing Screen |
Matte/Fresnel field with 5mm and 12mm diameter reference circles, focus brackets and etched horizontal and vertical lines. Idea for architectural photography. |
|
Type J Focusing Screen |
Matte/Fresnel field with 5mm diameter microprism focusingspot and 12mm diameter circle. Good for general photography. |
|
Type K Focusing Screen |
Matte/Fresenel field with 3mm diameter BriteView split-image range finder spot surrounded by 1mm-wide microprism doughnut. Rapid and accurate focusing for subjects with both straight lines and ill-defined countours. |
|
Type P Focusing Screen |
Same as Type K but with BriteView split-image range finder line at a 45 degree angle and etched horizontal and verticle lines. |
|
Type G Focusing Screen |
Clear Fresnel field with extra-bright 12mm diameter microprism focusing spot for viewing and focusing in poor light. Depth of preview not available. |
|
MB-20 Battery Pack |
Standard battery pack for the F4. It's powered by four AA-type alkaline-maganese batteries. Also serves as the F4's grip. |
|
MB-21 Battery Pack |
The MB-21 battery pack converts the F4 to F4s configuration, and delivers 5.7 frames per second film advancement. It's powered by six AA-type alkaline-maganese or NiCD batteries. |
|
MB-22 External Power Regulator |
Consists of the grip and bottom portion in common with the MB-21, with the terminal connection enabling the connection with the Nikon AC/DC Converter MA-4 via Nikon External Power Cord MC-11. A regulator, which converts the 15V current of the MA-4 to 8.2V, and a remote teminal are provided. |
|
MB-23 Battery Pack |
The MB-23 battery pack converts the F4 to F4E configuration, and 5.7 frames per second film advancement. |
|
MA-4 AC/DC Converter |
Especially recommended when using the F4 for extended studio use. Supplies constant 15V DC current to the MB-22. The MC-11 Cord plugs into the external power terminal of the Nikon External Power Regulator MB-22. |
|
SC-17 Remote Flash Cord |
For off-camera TTL flash. |
|
SC-23 Remote Flash Cord |
Enables off-camera TTL flash with Nikon Speedlight SB-11, SB-14 or SB-140 and an F4 with viewfinder DB-20 or DA-20. |
|
SC-24 Remote Flash Cord |
Enables off-camera TTL auto flash operation with Nikon Speedlight SB-24, SB-23, SB-22, SB-21B, SB-20, SB-16B or SB-15 and newer Speedlights, and an F4 with optional viewfinder DW-21 or DW-20. |
|
MF-22 Data Back |
A compact alternative to the MF-23. It will either imprint the data desired - year/month/day, day/hour/minute (24 hour clock), month/day/year or day/month/year - or leave the film blank with no imprint. |
|
MF-23 Multi-Control Back |
Enables the imprinting of any of the following data: date, time, frame number, serial upcount number, fixed number, shutter speed or aperture and exposure compensation value. Choice of imprint location - on the picture, or between frames. It also enables the camera to be used for interval timing, exposure delay, very long time exposures, auto bracketing up to 19 continous frames, freeze focus, and daily alarm. |
|
MF-24 250-Exp. Back |
Allows uninterrupted shooting of up to 250 exposures without changing film. |
|
DK-2 Rubber Eyecup |
Eyecup prevents stry light from entering the viewfinder from the rear and is helpful for eyeglass wearers in preventing scratching their glasses. |
|
DR-3 Right-Angle Viewer |
Provides an upright, unreversed image for right-angle viewing with the DK-7. |
|
DK-7 Eyepiece Adapter |
Lets you attach the DR-3 or DG-2 to the Multi-Meter Finder DP-20's eyepiece. |
|
DG-2 Eyepiece Magnifier |
Provides 2x magnification of the current central portion of the finder image with Eypiece Adapter DK-7. |
|
Remote Cord MC-4A |
The plug on one end of the MC-4A connects to the MB-21 or MB-22's remote-control socket. The other end had both plus and minus banana-type plugs. Used to fire several cameras simultaneously. |
|
Remote Cord MC-10 |
The MC-10 is for two pin cameras such as the F4s, F3 series (with MD-4), N70, FM2, FE2 & FM3A(with MD-12). Also works with the F5, F100, N90, N90s, F90 & F90x cameras if combined with the MC-25 Adapter Cord. |
|
Remote Cord MC-12A |
For remote control up to 9.8 feet away, the MC-12A has a handgrip, trigger button and trigger lock lever that makes operation convenient. Depressing the MC12A halfway turns on the camera's exposure meter, and depressing fully releases the shutter. |
|
Remote Cord MC-12B |
Same as MC-12A, except only 2.6 feet in length. |
|
Eyepiece Correction Lenses |
Five correction lenses for the Nikon F3HP: -3, -2, 0, +1 and +2 diopters, are available and work with the F4's DP-20 finder. |
|
Radio Control Set MW-2 |
Provides interference-free remote control up to 2295 feet. Three separate channels allow three cameras to be operated automatically. |
|
Intervalometer Mt-2 |
For unmanned time-lapse photography or work sampling. Provides either 2 second or 16 second delay shutter release. |
|
Cable Release AR-3 |
For use with F4 and MB-20 battery pack for shutter release operation via release terminal on the camera body. |
|
Double Cable Release AR-7 |
For use with F4 and MB-20 battery pack for shutter release operation via release terminal on the camera body. |
|
Pistol Grip 2 & Connecting Cord MC-3A |
The pistol grip can be screwed into either the camera's tripod socket or the tripod mounting collar of a telephoto lens to provide more stable handheld shooting. The MC-3A cord plugs intot he remote terminal of battery pack MB-21 or Power Regulator MB-22. |
|
Connecting Cord MC-17 |
Used to fire two cameras almost simultaneously. The MC17 is 9.8 feet in length, and must be used with the 250 exposure Multi-Contol Back MF-24 attached to the master camera. |
|
Connecting Cord MC-17S |
Same as MC-17, except 1.3 feet in length. |
|
Auto Extension Rings |
For close-up and macro work. |
|
Bellows Attachment PB-6 |
Mounts between camera body and lens for close-up and macro photography. Will produce reproduction rations from 1:1.1 up to 4:1 with a 50mm lens. |
|
Repo-Copy Outfit PF-4 |
Enables you to make high-quality photographic copies of photographs, illustrations or diagrams. |
|
Macro Adapter Ring BR-2A |
Fits between camera and lens to enable lenses to be mounted in reverse. |
|
Focusing Stage PG-2 |
Simplifies close-up focusing when using a tripod-mounted F4. |
|
AH-4 Hand Strap |
Secures the camera comfortably in hand for a firm grip without hand fatigue. It is particularly useful when using longer and/or larger Nikkor zoom and telephoto lenses. |
|
CF-41 Camera Case |
Semi-soft camera case. |
|
ML-2 Remote Control Set |
Offers remote camera control up to 330 feet away. |